FB090 FB092 Bronze Bushing Sliding Bearing Customized Dimension
FB090 & FB092 Bronze Bushing Sliding Bearing Straight Type & Flange
Type
Bronze Bearings are with lubrication holes
Sliding Bearing FB090 & FB092 Bronze Bushing E90/E92 Sleeve Bushing
| ITEM | ID | OD | L |
| FB090 bronze bushing 30*34*30 | 30 | 34 | 30 |
| | | |
| FB090 bronze bushing 40*44*40 | 40 | 44 | 40 |
| | | |
| FB090 bronze bushing 50*55*40 | 50 | 55 | 40 |
| | | |
| FB090 bronze bushing 50*55*50 | 50 | 55 | 50 |
| | | |
| FB090 bronze bushing 50*55*60 | 50 | 55 | 60 |
| | | |
| FB090 bronze bushing 60*65*40 | 60 | 65 | 40 |
| | | |
| FB090 bronze bushing 60*65*50 | 60 | 65 | 50 |
| | | |
| FB090 bronze bushing 60*65*60 | 60 | 65 | 60 |
| | | |
| FB090 bronze bushing 70*75*50 | 70 | 75 | 50 |
| | | |
| FB090 bronze bushing 80*85*60 | 80 | 85 | 60 |
| | | |
| FB090 bronze bushing 90*95*60 | 90 | 95 | 60 |
| | | |
| FB092 bronze bearings 40*44*40 | 40 | 44 | 40 |
| | | |
| FB092 bronze bearings 40*44*50 | 40 | 44 | 50 |
| | | |
| FB092 bronze bearings 50*55*50 | 50 | 55 | 50 |
| | | |
| FB092 bronze bearings 50*55*60 | 50 | 55 | 60 |
| | | |
| FB092 bronze bearings 60*65*50 | 60 | 65 | 50 |
| | | |
| FB092 bronze bearings 60*65*60 | 60 | 65 | 60 |
| | | |
| FB092 bronze bearings 75*80*60 | 75 | 80 | 60 |
Bronze Bushing Size
The basic features
With CusN6.5P0.1 or CusN8P0.3 bronze as the matrix, the bronze hole layout bearing is designed
with uniform and orderly oil filling holes. Lubricating oil is
injected after assembly. The bearing has the advantages of large oil storage, convenient installation, and small design machine, and can
replace the copper sleeve to use, greatly reducing the cost
The inner hole of the product is full of and oil pits, which can
store a large amount of oil during use and extend the refueling
interval.
2. Less oil lubrication, suitable for occasions where it is
difficult to add oil or water lubrication;
3. Good wear resistance, low friction coefficient, and long service life;
4. It can be used within the range of -100℃ to 200℃;
5. Good coupling performance, low noise, no pollution;
6. Thin-walled structure, lightweight, can reduce the mechanical volume;
7. The matrix has high density, gas-free shrinkage cavity, and large bearing capacity;
Currently has been widely applied to various mechanical sliding
parts, such as automation machinery and equipment (scale, swing,
slide, bending, cyclotron, turning parts) of the hydraulic cylinder
guide bush, textile machinery, plastic molding machine, die-casting
machine, rubber machinery, hydraulic truck, automobile, motorcycle
industry, ports, water conservancy, construction, agricultural
machinery, etc.
Long service intervals under severe operating circumstances.
Wrapped bronze bearings are ideal for applications where there are high levels of contamination. Their running surface is provided with diamond-shaped lubrication
pockets or a hole pattern. The lubrication pockets must be filled with grease when the bearing
is installed. The wrapped bronze bearings are produced according to the ISO 3547.
Materials
Wrapped bronze bearings are made entirely from phosphor bronze CuSn8. CuSn8 is characterized by the purity of the alloy with only a very low level of impurities. Wrapped bronze bearings are produced from strips
that are subsequently wrapped and calibrated.
Lubrication
Wrapped bronze bearings must be lubricated with grease or oil on
installation. A good quality lubricant is essential as it will reduce friction and wear by forming a film between the plain bearing and the
shaft. For heavily contaminated applications, we recommend sealing
off the bearing. This will protect both the bearing and the
lubricant.
Advantages
The main advantages of wrapped bronze bearings include:
- Long service intervals
- Not affected by impurities
- Suitable for corrosive environments
- Suitable for impact loads and vibrations at low speeds
- Good heat dissipation
Applications
Wrapped bronze bearings are especially suited to severe operating
conditions where frequent maintenance is not possible. Common applications are:
- Agricultural vehicles
- Lifting gear
- Offshore
- Excavators
Type |
Thickness |
Oil Depth |
| FB090 glidlager | 1mm | 0.3～0.4mm |
| 1.5mm | 0.4～0.5mm |
| 2mm | 0.5～0.6mm |
| 2.5mm | 0.6～0.7mm |
FB09G glidlager FB08G glidlager | 0.65mm | 0.15～0.3mm |
| 1mm | 0.3～0.4mm |
| 1.5mm | 0.4～0.5mm |
| 2mm | 0.4～0.5mm |
| 2.5mm | 0.4～0.5mm |
