Dx Pom Polymer Plain Bearings With Oil Groove for klift, trucks & other platforms.

An extensive inventory of bronze bushings offering customers direct delivery service. Fast direct delivery service for quality products.

DX POM bushings were developed for lubricated applications and consist of three layers: a steel mantle and a sintered bronze layer impregnated and covered with a polyacetal (POM) bearing material.

POM Metal-Polymer Plain Bearings Grease Lubricated - DX - Oil or grease lubricated bearings - Metric & Imperial Sizes

Standard DX bush Components available from stock

• Metal-Polymer Composite Bushing Material

• Steel Back + Porous Bronze Sinter +
  POM with Lubrication Indents

• DX provides maintenance free operation • DX has a high pv capability • DX exhibits low wear rate • Seizure resistant • Suitable for temperatures from -40 to +120 °C • High static and dynamic load capacity • Good frictional properties • No water absorption and therefore dimensionally stable • Compact and light • Suitable for rotating, oscillating, reciprocating and sliding movements • DX bearings are prefinished and require no machining after assembly

These DX Bush Bearings are widely used in the Machinery Industry

(Inside Diameter x Outside Diameter x Length)

• Lightly lubricated DX bushings for grease or oil lubricated applications
• Standard parts contain grease marks in the slip layer; single sliding layer available on request
• Optimal performance under relatively high loads and low speeds
• Suitable for linear, oscillating and rotary movements
• Wide range of parts available from stock

Bearing forms available in standard dimensions

• Cylindrical bushes
• Flanged bushes
• Thrust washers
• Sliding plates

POM Composite Bearing, Replacement DX Bush Bearing | Self-lubricating Composite Bushings

POM composite bushings are referred to as prelubricated because their material is designed to operate with marginal lubrication. These bushing type effectively fills the gap between fully lubricated and dry sliding bushings.We offer a wide range of straight POM composite bushings. The advantages of these sleeves are:

• • maintenance-free operation
• • very good frictional properties
• • high load capacity
• • high sliding speed
• • low working clearance

Metal-Polymer Composite Material

POM Composite Bearing Benefits

• Marginally lubricated bearing material for grease or oil lubricated
applications
• Standard parts contain grease indents in the sliding layer; plain
sliding layer available by request
• Optimum performance under relatively high loads and low speeds
• Suitable for linear, oscillating and rotating movements
• Wide range of parts available from stock

POM Bearing Metal-polymer bearing lubricated with grease

Pom Composite bushing Characteristics

Pom Composite lubricated bushing can be used for grease or oil lubrication applications, or in an oil-free environment

The standard parts contain grooves in the sliding layer of the contact parts, which can store grease or friction debris.

Smooth sliding layer can be designed and provided upon request

Composite bearing sleeve has the best performance under relatively high load and low speed, and the highest relative life

Composite bearings are used in environments of linear, oscillating and rotational motion

All kinds of bearing parts are available from stock

A brief introduction to polyformaldehyde (POM) materials

1. With high mechanical strength and rigidity;
2. The Maximum fatigue strength;
3. Good environmental resistance and organic solvent resistance;
4. Strong resistance to sustained impact;
5. Widely used temperature ranges from -40℃ to 120℃.
6. Good electrical properties.
7. Good recovery.

8. with their own lubrication, good wear to hold;

9. Excellent dime

Melting point of 175 ° C
Density 1.42 g/mL at 25 °C
Flash point 158 °F storage condition 2-8°C

Self-lubricating oil-free composite bearing structure composition

Wrapper Bronze Bearing characteristics

Logistics and transportation equipment applications

The noise of traditional bearing, short maintenance cycle and service life, and high maintenance cost limit the normal operation time of equipment, especially transportation equipment and field operation equipment. The application of VIiPlUS POM BUSHING self-lubricating bearing can not only solve these problems, but also improve the comfort level of equipment operation.For example, the use of lubricating oil or one-time painting can solve the process maintenance and high shutdown costs, while avoiding environmental pollution.Reliable, light and excellent bearing solutions Pom Composite Bushing,Pom Bushings,Pom Sleeve Bushing

Pom Composite Bushing are widely used in logistics applications

he railway, The inter-city rail, shipbuilding, space, Forklift truckT

Today, our light and maintenance-free bearings are used by all major commercial and military aircraft manufacturers and tier 1 suppliers for fixed and rotary wing aircraft. Our bearing solutions are used in a wide range of aeronautical applications, from the landing gear, to flight control and engines, to a variety of customized applications in the passenger and aerospace seats sector.
Our aircraft bearing solutions are used in a variety of aerospace applications from landing gear, flight control and engines to passenger seats, as well as in a wide variety of customizations for the aerospace industry

You can customize various POM oil-free self-lubricating bearings from us, and design related drawings